Who makes the best miter saw?
Want to buy? If yes, then you are in the right place. We have worked hard. After researching online and spending hours on these miter saws, we have shortlisted the top 10 best miter saws which you can buy right now.
These Miter saws can cut more than just simple bevel angles. The miter saw is ideal for cutting all types of moldings, including crown moldings; cutting with a miter saw is much easier than ordinary saw.
We will help you save time and choose the most excellent Miter saw out there.
BEST TOP 10 MITER SAWS 2019
|Name & Position||Dimensions||Weight||Price|
|1. DEWALT||21.5 x 17.7 x 17.1 inches||56 pounds||Check Price|
|2. Bosch||31 x 23.8 x 22.5 inches||88.2 pounds||Check Price|
|3. Hitachi||20.7 x 16.5 x 13.7 inches||33.6 pounds||Check Price|
|4. Delta||29.5 x 22.5 x 20 inches||55 pounds||Check Price|
|5. Festool||29.5 x 22.8 x 20 inches||1 pounds||Check Price|
|6. Black+Decker||15.2 x 15.8 x 17.5 inches||16.99 pounds||Check Price|
|7. Craftsman||20 x 18.5 x 16.5 inches||31.8 pounds||Check Price|
|8 .ShopSeries||22.5 x 18.2 x 16.6 inches||44.8 pounds||Check Price|
|9. Evolution Power||30 x 20 x 25 inches||39 pounds||Check Price|
|10. Milwaukee||30.9 x 22.8 x 21.9 inches||77.8 pounds||Check Price|
This miter saw is a very versatile tool. You can use the saw for plates like a cutting saw and a miter saw. The device has a 1,650-watt motor, with which various materials can be processed. The speed can be controlled electronically depending on the material. In addition, you can work very accurately using the nice LED cut line feature.
This miter saw is completely assembled and ready to use. All you have to do is plug in the saw and pull the locking pin, and you can start rolling. Press the handle down slightly and pull out the pin the head will open.
This is actually is easy to use, you only want to press the trigger and let the blade reach full speed. Slowly lower the blade to cut the plate. The widest panel that could be neatly cut 90 degrees is 13 3/4 without the special configuration to get a 16 cross section. While cutting some wider pieces, draw the saw in your direction, lower your saw towards the tool board, and also slowly shove back to adequately make the cut, the rails run very smoothly in this saw!
Changing the miter angle is easy: press the button in front of the handle. The miter angle can be up to 60 degrees on the right side and up to 50 degrees on the left side, which is pretty generous. The miter scale has convenient detents (notches) for common angles. The little lever on the very side of the button bypasses the seals. Once the miter saw has rotated to the angle you want to place it, simply push the handle down to lock it.
It is also easy to adjust the very bevel angle. Simply release the tilt lock button, turn it to the desired angle and tighten.
The stunning bevel angle stops automatically at 45 degrees, but there is a small lever that you can pull to turn the head further to 49 degrees. If you need the bevel angle to go in the other direction, you can pull it out with another button, it will turn 0 degrees and continues to turn.
This miter saw is full of useful features. The first is my favorite, the CUTLINE LED work light. On top of the saw is a switch to illuminate a light that casts a shadow of the blade on your board, so you can see exactly where it will cut. This feature works well for straight and angled cuts, making it easy to see where the cut is being made.
- The blade moves to the left.
Bosch has developed a revolutionary new design that specifically eliminates some problems. Instead of gliding on two rails, the Bosch GCM12SD miter saw uses a pair of articulated arms that do not protrude beyond the saw. This miter saw changed the rules of the game and there were some really great things I could check. In the corner is a prototype that grabbed my attention: a sliding saw that did not use rails.
As an alternative, this very prototype saw employed two good arms with potted comportments in the stunning joints, using one arm horizontal as well as the other vertically aligned. The result was the softest and most comfortable experience I had with a sliding saw.
While the incredibly smooth Axial-Glide pusher system is definitely the saw’s calling card, the rest of the feature set is almost as impressive.
At first, Bosch mounted the miter and level control on the front of the saw. It is no longer necessary to release a knob and adjust the tool bevel.
Secondly, the saw is equipped with sliding support on both sides of the table and thirdly, the nice saw boast a vertical footprint of a crown molding aptitude, a flat aptitude of 14 ins for the base plate. This can cut up to 4 and half inches thick stick (14 inches wide) at 90 degrees or perhaps 2-3 /4 inches stick (again 14 inches wide) at 45 degrees.
The miter saw GCM12SD weighs 65 pounds and is surprisingly light. It is equipped on each side of the saw with a carrying handle and an upper carrying handle and a two-sided trigger. While it is necessary to mount it directly out of the box, in reality, it is nothing more than the installation of the miter lock button and the bevel lock lever on the front of the saw. This takes about two minutes.
The instruction manual is exceptionally well written and includes sections on the cutting slots (using the depth gauge), the base plate and even the crown molding.
One last element I would like to talk about: while I discussed it with the very Bosch engineers, these engineers told me some users complained in field tests that the sliding mechanism was too much. As a result, the ability to add voltage to the slider using the onboard button has been added. This is a subtle feature that adds the finishing touch to an incredible tool.
- There is a minor installation required, such as a fence
This miter saw has a light design and includes miter seals on common cuts for woodworking. Its weight is 26 pounds, making it one of the lightest and most portable options; It has a price for a home project and hobby enthusiast, but could also serve as a lightweight saw for professionals.
The horizontally padded and durable Hitachi C10FCE2 handle provides more miter saw stability, which compensates for cutting pressure. The miter scale extends from 0 to 52 degrees both to the right and to the left.
This is not a double saw though. Its great light weight makes it easier to move around the workplace or at project locations. The included handle also offers a more portable design. It has a compact size of 15 x 13 inches. The dust collector on board should help to keep your workplace cleaner.
This miter saw has a rotating guide for more precision and stability. The soft starter should help improve accuracy, safety, and stability. Electric breakage should also help to operate the saw safely and increase accuracy. The extended stop is raised to 4 inches for vertical cutting.
As with any miter saw it is recommended to calibrate the angles on a piece of wood before cutting, a miter saw may not provide immediate precision outside the box. If you are constantly working with wide plates, you may need a larger or stronger saw.
The Hitachi has a cutting capacity of five inches. It may be more ideal for narrower cuts such as crowns or moldings instead of wider cuts than wide covers. The bezel adjustment requires a metric key, which can be uncomfortable for some. While Hitachi makes a miter saw with a lead laser on board, this model is not equipped with one.
The 10-inch Hitachi miter saw can be a good value for frequent but not heavy use. It should work well for DIY enthusiasts and non-professionals. Whether you want to create cross-sections, miter cuts, bevel cuts or compound cuts, this saw is strong enough to do the job.
When it comes to accuracy, this unit comes with a clamp that you can secure against a worktable to prevent wobbling. The blade is a workhorse and you should direct it to where you want to cut and it will do everything else for you.
In developing this masterpiece, safety was clearly a priority for good Hitachi engineers. First, it has a sophisticated blade guard that not only protects it from dust but also protects it from a rapidly rotating blade. In addition, this device is generally well designed. It is reinforced with a clamp, it does not vibrate and above all, it does not wobble.
It is also equipped with a dust collector, but we believe it would have been better able to collect wood dust.
- Great design with a set of fence and extended screw
- It has a 24-tooth saw blade
- It is completed with a sawdust bag.
- The manual is not very descriptive to help newcomers.
The excellent Delta CRUZER 26-2240 10-inch miter saws with military aluminum robotic arms provide unsurpassed precision, smoothness, and durability. Start with a sturdy base with a wide, sliding guide to securely fasten the nested up to 7.5-inch crown profile or maybe 6.5-inch vertical base. It will be 60 degrees to the right and 50 degrees to the left of the miter capacity with positive stops at the most common miter positions.
The patented loader arm mount is made of military grade aluminum and offers unbelievable accuracy from the beginning and for years. High-performance bearings ensure unparalleled smoothness. You can even set the stroke to the desired voltage. With an easily accessible, beveled switch, you can truly bevel 45 degrees left or right.
The CRUZER delta miter saw has a 10-inch blade. With a versatile close-folding design that offers the best 16-inch cutting capabilities. Double bevel 45 ° to the left / 45 ° to the right with front panel release from the front and 7 positive beveled stops in the most common angles as well as simple to reach the lever to efficiently budge between the stops.
This Miter Saw has a miter capacity of 50 to the left / 60 to the right, one-handed miter key miter front miter feed forward for the fast movement. The casted handle and also full-size stunning trigger are perfect for right-handed or perhaps left-handed use with great cuts.
It has 1.5 in. Dust connection for vacuum connection and excellent dust extraction. The Cruzer is very easy to operate thanks to its 7 positive stops, one-hand front miter, right-handed and left-handed grip, and easily adjustable sliding tension.
Another impressive feature is the industrial strength of the Cruzer. The base is sturdy and has a large sliding guide. The Cruzer’s support bracket and loading arm make this miter saw smooth, precise and very strong. And though the Cruzer is rugged, it’s easy to store and transport thanks to its space-saving design.
This delta saw is solid, heavy, extremely soft and adapted for adjustments and movements. Although it has some plastic parts, they seem to be made of high quality and durable materials. Even the Dewalt has some plastic, but the plastic material is strong and like the Delta, you don’t have to worry about breakage or wear.
- Beautifully designed machine
- The cut is smooth and precise.
- All configurations are simple and they lock fast
- The miter handle is really comfortable to use compared to other miter saws
- Some say the blade sometimes wobbles
When it comes to high-quality miter saws, this wins. If you want to replace your old tool with a worthy replacement, now is your chance. Many people think the price is a unique representation of high quality. It is not quite true though. There are many very expensive models on the market that are simply not worth investing because of many mechanical issues.
An again, there are some that offer more than you’ll ever need for a challenging project. The moment you see this Festool Kapex Mitra you will realize how incredible it is. It has more than enough features to tackle any project without a problem. The 1600-watt motor offers variable speeds from 1400 to 3400 rpm. As you can see, it is able to cut at any angle without any difficulty.
Safety is at the highest level. The blades are specially designed to reduce noise and vibration. In addition, the gauges in this model are well aligned and properly calibrated. With the dual laser design, you can cut every angle with high precision. The dust extraction is good, easy to set up and, above all, efficient.
You can tell immediately that they have invested a lot of work in this very machine. Everything is right, accessible and conveniently positioned. It’s not the easiest miter saw, but it’s not the most complicated. Inexperienced users should read the manual before connecting the device to make sure everything is OK. In fact, even those who are convinced of their experience should consult the manual for guidance.
As I said, the gauges are excellent. It goes without saying that the basis for miter and bevel make the difference between a cheap unit and a premium unit. This is easily one of the most accurate in its own category.
With this very system, you can change the sheet quickly and easily. Many people have difficulty changing blades because they also require alignments and recalibrations. It goes without saying that the Festool Kapex system is good news for professionals and amateurs.
The security elements are excellent. The protection of the blade is transparent and easy to use. The handle is not padded, but due to the specially developed thin plates, it still does not vibrate as much as one would expect. Thanks to the innovative design, everything is available when the machine is loaded. So you can react quickly if something goes wrong.
One among the amazing features of this very machine is actually the dust removal. The maker says that it’s truly able to suck as much as 92 percent the dust out there, which is at least impressive. The most important thing is that it’s integrated into the machine instead of just mounting a dust bag on the exhaust part. Instead, you can connect a hose to the connector and use some Festool dust extractors for optimal suction.
- You can essentially perform perfect bevel cuts with great certainty.
- Dust extraction better than the competition.
- All technical aspects of this saw are commendable.
- The laser is useful
- Some say it’s expensive
The fame of the tool with the fans is essentially the low price but also goes back to the many features of the Sierra. One of the most impressive features is the saw’s 9.0 amp ball bearing engine, which offers output that far exceeds the price.
Like the vast majority of Black and Decker power tools, the M1850BD miter saw has been designed for average home improvement jobs, making it ideal for light to medium tasks. This gives you a smoother and more precise cut in a fraction of the time of a manual saw.
This machine was brought to online for the first time in 2016, making it a relatively new product whose technology has not been outdone by the latest competitive miter saws.
As mentioned in the previous section, the Black and Decker M1850BD was designed to meet the needs of the average Do It Yourself enthusiast. This would mean a dedicated amateur who already has experience with power tools.
If you have recently begun your woodworking trip and have not used a miter saw in the past, we recommend that you use a more basic model that can serve as a starting saw until you feel like you are moving to the M1850BD.
To increase the versatility of this miter saw, the Black & Decker design team has placed helpful stops that allow an angle of 0-45 degrees to the left and right. Each of the M1850BD’s nine stations is the result of careful study by the manufacturer to identify the most commonly used cutting positions for home improvement and professionals.
Budget power tools are not always supplied with accessories, but Black and Decker have long been dedicated to customer satisfaction, which is why every time you buy it, there are a few handy enhancements. If you choose this machine over the other miter saws in its price range, you will receive a free dust bag and a blade wrench to simplify the saw operation.
It also gives you a comprehensive guide that guides you through the capabilities of the tool to avoid common mistakes made by other first-time users of the product.
This miter saw is certainly much less complicated than some of the other miter saws available on the market today, but it still requires a thorough study before you can work with it. The nice manual, which comes with the saw, will help you to master the tool
- A great saw and cuts 2x4s like a champion.
- This miter saw is easy to handle and has a good performance
- Good value for the price
- Some say the sawdust bag never stays safe enough
This compact model is a much better quality tool. What truly makes it compact out there? The catalog says that this saw requires 39% less space than the standard model. Otherwise, everything else is the same. The difference is how the rails work. Most saws attach the saw head to the rails, and the rails slide in and out from the back of the saw.
Place this style close to a wall, and the wall prevents the rails from fully functioning. In this compact model, the rails are fixed and the saw head moves along a carriage. As a result, the saw always takes the same place.
Some unique features are:
Single Bevel: This actually implies that the saw only leans to the left. Up to 50-degree miter cuts are still possible on both sides, but if you need to perform compound angles, you need to consider how to position your work piece. The more expensive double- saws lean to the left as well as the right, which speeds up production but is almost twice as expensive.
Laser Guide: it was actually dead after unpacking, but is barely visible outdoors in full sunlight. It is located in front of the saw and is protected by the shield. There are two thumbscrews to set it. It is powered by the plug and has an on/off switch next to the trigger.
Rail slide lock: This prevents the saw from slipping during storage or during transport. It can be locked and used as a non-movable saw.
Adjustable wings: This is a good feature, but once you’ve built a miter bracket in the shop, it’s not much use
The saw is accurate in all box settings. I did not have to spend any time calibrating and worrying about the configuration. The only parts I had to install were the handle that pivots the miter bed, the dust bag and the clamp that holds down
The fit and finish are good; it does not feel cheap but well built and solid. The head of the saw moves smoothly along the rails as Miter stops are firmly coupled. The miter bed pivots firmly and simultaneously without sliding.
The bezel has a stop at zero, 45 and 33.9 degrees, all are positive, so you can be sure that the stop is where it should be. I like how the laser is configured and how it fits. It is protected by the stunning blade guard against unintentional impact. You don’t need a tool to adjust and you are in front of the blade, and there is no accumulation of dust.
The rails slide smoothly without tilting. There is enough resistance that does not fly from one side to the other. Slide the saw towards the dust accumulation spot; you will never have to collect much dust.
- It can process a wide range of woodwork.
- The sliding seat is unique.
- The sliding system is very useful when you need to measure again to finish a cut
- Dust bag in this is also not worth it as others.
This miter saw is actually equipped with a unique Amp motor and is therefore ideal for woodwork, eg. As for cutting wood for moldings, siding, frame and other hardware store projects. The robust die-cast aluminum holders are sturdy and lightweight. This miter saw has 0-45 degree inclinations and miter seals that are available in the usual angles for most cuts.
This machine is also equipped with an integrated dust collection system to keep the work area clean, this performance miter saw offers ShopSeries design that is superior to a range of power tools. Reliability, ease of use and innovative precision features help the user to complete his projects.
Miter saws are generally more expensive than other standard saws, such as jigsaws. The reason is that they work hard and are much heavier than a normal saw. When a tool becomes expensive, the customer goes to great lengths to carry out a comprehensive search and then buy it because he can not afford a loss due to a bad buy.
If you are also interested in a good miter saw with leg rest, you should consider one of the good ones called ShopSeries RK7136.1. Miter saws with 14 amp degree.
A good miter saw should be lightweight so you can easily transport it. You cannot work with a tool that stays in one place, as it becomes difficult. It has a die-cast aluminum base that raises the maximum weight to 35.5 pounds, which is pretty low. It has a chamfering capacity of 0 to 45 degrees and thus can cut much more precisely.
The best thing about the miter saw with leg rests series is the fact that you don’t have to worry as it has a 2-year limited warranty. The engine is quite powerful as it reaches a maximum of 14 amps and has the maximum speed of 5200 rpm, making this miter sufficient for many hard materials.
This miter saw has metal legs that make it easy to attach this saw to the ground from a distance. Work easily without having to buy a leg rest separately as you already have one. The support is attached directly to the saw base.
With the rotating wheels, transport is easier and you will not feel heavy while working. The voltage is maximized to 120 volts and 60 Hertz. The complete package includes the 10-inch miter saw ShopSeries RK7136.1, a dust bag, a stand with legs and a work clamp.
The manufacturer warrants this product to be free from defects in material and workmanship for a period of 2 years from the date of purchase.
- It comes with a stand
- Light saw
- Powerful for hard materials
- Cuts efficiently
- The user manual could be more descriptive.
The development of the Rage3 plus has done a fantastic job. It’s a very versatile saw that can be quickly turned on for fast work, for example, for cutting a metal pipe piece and cutting an unusual piece of wood, and the power and cutting ability to cut many large pieces. The sliding mechanism allows a really wide cut, ideal for deeper floors and window frames.
The multipurpose blade easily cuts wood, metal, and plastic. You never have to buy a set of blades. You can connect the Rage3 and trim 99% of the materials in seconds without many configurations. It is ideal for hobby carpenters and do-it-yourselfers that need a quick and accurate solution to many small jobs!
If you buy cheaper models, you run the risk of buying another miter saw for a larger job. If you invest in Rage3, you only need to buy once.
Some of the features of this miter saw
The powerful engine of the Evolution Rage3 is sufficient for a really tough job. This allows you to easily cut some of the hardest materials and should last a long time. Some models with less powerful engines run the risk of burning under excessive pressure, but this engine has plenty of power reserve. Evolution also sells replacement brushes when they need to be replaced. It is a machine designed for a long service life!
The Evolution Rage3 offers impressive capacity, not just in price, but in all brands and models. The maximum cut size without miter or bevel angle is 75 x 300 mm. As the cutting angles become more pronounced, the cutting size at the maximum miter angle decreases slightly to 210 mm and at the 45-degree incline angle to 40 mm.
A large number of miter saws require different saw blades for different tasks. This takes a lot of time if you need to continue the exchange. Evolution offers other specialized blades if you need them, but most of us will be pleased with this sheet. If you suddenly find a job that requires fast cutting, Evolution Rage3 can do just that in seconds.
The laser guides allow very precise cuts and ensure that you never deviate from the course. This helps especially with larger pieces of material that you work with and thus achieves the best result.
The very sliding means gives the great Rage3 a different dimension than a few of the low price miter saws. This lets you to cut a lot wider sections of wood. After lowering the saw for the first part of the cut, you can push the blade through the widest piece of wood. For larger construction tasks such as mast deep window frames, walls, and garden furniture, this is a very good tool for you.
- Brilliant value for money
- Great cutting performance
- Multi-purpose blade for wood, metal, and plastic
- Dust bag could be more effective
This miter saw has what Milwaukee calls constant current technology, holding the bucket with or without load at 3200 rpm. Whether or not this is true, you can say this technology helps maintain smooth cuts and sharp edges, whether tiled wood or hardwood. The sensation takes a little time to get used to, but when you feel it, you will know how well you cut the saw, even with the machine original blade.
The machine adjustment can also be locked in two different ways. There are 9 latches (0 ° and 4 on each side) and a manual setting with a range of 48 ° on each side. The whole mechanism is easy to use and can be adjusted quickly without leaving the front of the saw. Although the arm is quite firm, it does not feel the weight when setting because the balance of the whole machine is well distributed. That way, you can spend less time and energy to get the right angles and more effort to trim easily.
It would be understandable to think that the bevel adjustment was just a trick, but after the first applications, you will be surprised at how useful and almost necessary it is for a more difficult job. It is very easy to use and the instructions for switching on and off are located right next to the working mechanism.
The soft, green light allows you to check your angles to a tenth of a degree as well as reproduces the same cuts reliably over and again. Another feature that would be easy to ignore could lead the enthusiastic reviews of many satisfied customers to rethink it. The simple dial can only be operated with one hand, so your other hand never has to stop what you are cutting. This feature only offers a significant advantage over others.
Milwaukee has done a very good job with the exhaust system. First, it is good to eject most of the sawdust that it produces, instead of dumping it in the body and creating more cleaning or repair for the owner. It not only collects and directs the vast majority of debris, but the exhaust also has a bag attachment that collects debris.
Realistically, the percentage is likely to be around 70%. This is definitely better than most miter saws. Some vacuum cleaners can easily increase this percentage. If the bag does not do this for you and you want to install a vacuum cleaner, you will need to purchase the special Milwaukee vacuum adapter for about $ 20, as the square shape of the outlet end is unique to this saw.
Even if you don’t use the bag, the fact that the vanishing points point downwards will give you a cleaner working space than most other major branded versions.
Milwaukee made a big decision by using double lights instead of the laser guide. This feature is the easiest to understand, but it can be the most useful. The fact that the lights are located on either side of the blade provides excellent illumination and eliminates the shadow of the blade. The lights are near the blade housing so they are out of the way and coming from the best angle.
No question, the Milwaukee 6955-20 is a workhorse. This is the type of saw that you can use for almost any project and get the results you want. And then again, this machine was actually constructed to last long.
- All settings work smoothly and easily.
- Digital reading is a great thing
- Recommended for those who need the product for intensive use
- The Milwaukee 6955-20 is a workhorse.
- A bit heavy compared to others
Let’s know about Sliding and Compound
Things are a lot easier when we have the right things in perspective. Take for an instance, you need to cut, or you need to make an angle cut on a solid object, the right perspective would be to use a proper miter saw for your need. Perspective aside, you run off to a hardware store and go to the saw section, you look around and get overwhelmed by the stock of miter saws you see. We will be helping you clear out every confusion you might be having regarding the miter saw. We are going to be helping you make a clear cut between the compound and sliding miter saw so that you know the best fit for your need.
To begin with, we will be helping you determine which saw is best suited for what type of job. We will guide you through the uses, pros, and cons so that you can make a deliberate choice when you want to purchase a miter saw.
COMPOUND MITER SAW
The compound miter saw is an excellent saw that can be used to cut numerous items. They are also called the bench miter saw because they are fixed in the movement they make, they allow for very little movement compared to the sliding saw. One great thing about this miter saw is that it allows you to have an angle cut by tiling the blade through the pivot handle.
The compound miter saw probably got its name because it can be used to get more than one pattern of cutting design. An advantage you have using the compound miter saw is that you have a better cutting arc compared to that of the sliding saw.
A little unfavorable condition you might face with this miter saw is that it has a limit to the thickness of material it can cut. Take for an instance, a compound miter saw of 10 inches can only cut through a thickness of 6 inches.
SLIDING MITER SAW
The sliding miter saw is the variation of the Compound or static miter saw. It is also as excellent as the compound miter saw and can do everything the compound saw can do. The distinguishing factor of the sliding saw over the compound saw is that you have greater cutting power because the blades of the sliding saw are made to glide through on the rail(s) created for it.
The sliding miter saw can help you possess greater cutting power and can well enough form the cutting arc. A little downside to this saw is that it might not be able to accurately cut the common mold of the material you’re trying to use. The pro to the sliding miter saw is that you can cut thicker materials. If you have sliding saw of 12 inches, you can make a cut of up to 16inches on items.
Please note that for these two types of saws, there are two types of bevel cutting model, the single and the double. We have been describing the single bevel type; you can make an angle cut from either left or right. If you need to make an angle cut on two ends with a single bevel cut, you will need to turn to the other end and adjust the angle after cutting one end.
The Safety Tips to Keep in Mind for using Miter Saw
Miter saw is a carpenter’s professional tool, also known as chopsaw. It is a must-have tool for the woodworking shop. This instrument cuts accurately to make anything including furniture, but the saw is only for dividing larger pieces to smaller one so it can further move to the other machines for more precise cutting. This fine tool has multiple models from simple cutting to the smooth slide with better cutting capacity.
Though, the tool is extremely useful but it is important to use it with care to prevent injuries. There are a number of possibilities that accident can occur or the tool does not operate properly if you are not using it with care. You need to put yourself in a safety zone at the workplace especially working with such powerful tools. There are some safety tips for using miter saw that can improve your experience with the tool.
Here is how to use miter saw with safety and accurately.
Protection with Appropriate Clothing
You need to cover and protect your body parts including eyes, ear, hands. You should not wear loose jewelry or hanging clothing near miter saw. It is not safe to use it without protection glasses, gloves and other protective clothing for staying safe. It is great to make a practice of using the instrument with due protocol. Also, make sure that your clothing is comfortable and your body is properly covered as well. You should use a dust mask as tiny wood particles can be problematic. If your miter saw is noisy you should also have a hearing protection to protect your ears.
Cleaning the Saw
The dust and wood particles can go inside the saw and interfere its working. It might not cut accurately due to cutoffs in it. Clean your saw after working, at the end of the day at workshop so it can work great for longer. Make sure that the blades are clean and debris is clean. Keep a basket nearby to put the extra stuff in it and the debris remains clean. You can also use filter bags.
Lit up the Area
The work area should be lighted so you can cut on right lines and angles. Lighted area makes it visible so you keep your hands at safe distance from the cutting blades. It is best to keep your hands at least 6 inches away.
The Extension Cord
You should consider using a compatible extension cord with the saw. The number of prongs on miter saw should match the extension cord.
we believe with this guide you will be able to get a better understanding of the miter saws and know which to choose according to your priorities.